Skip to content
Serving Los Angeles and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (669) 318-2662

Ductless Mini-Split Installation in Los Angeles

Serving Los Angeles and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (669) 318-2662

The short answer

A ductless mini-split is a heat pump that heats and cools individual rooms without ductwork, which makes it a strong fit for homes with no ducts, hard-to-cool rooms, additions and ADUs. We size the system room by room, check your electrical and installation options, and give you a written estimate before any work begins.

A ductless mini-split heats and cools individual rooms without ductwork. An outdoor heat pump connects to one or more indoor units through a small line set that runs through the wall, so there's no attic duct system to build or repair. Many Los Angeles homes are good candidates: older bungalows with no central air, converted garages, and hot upstairs bedrooms. A mini-split puts heating and cooling in the rooms you actually use. EverClime HVAC Contractor installs mini-splits in Los Angeles and nearby cities. This page explains how we decide whether one fits your home and what the process looks like.

Signs a Ductless Mini-Split Makes Sense

Los Angeles has dry summers and mild winters, but conditions vary a lot by neighborhood. Inland areas and the valleys run much hotter in summer than homes near the coast, and fall Santa Ana winds can bring hot, dry spells late in the year. A setup that keeps a coastal home comfortable may struggle in a valley house with west-facing windows.

A mini-split is often worth considering when:

  • Your home has no ductwork, or the existing ducts are damaged, undersized or hard to reach
  • One room, addition or converted garage stays hotter or colder than the rest of the house
  • You rely on window units or portable air conditioners that are noisy and only cool part of a room
  • An old wall heater or floor furnace is your only heat source
  • You want separate temperature control for different rooms
  • You're planning an ADU or remodel and don't want to extend a central system

What We Check Before Recommending a System

A good installation starts with correct sizing. We don't guess from square footage alone. We look at each room the system will serve: its size, ceiling height, window area and direction, insulation, and how much afternoon sun it gets. An oversized unit cycles on and off and controls humidity poorly. An undersized one runs nonstop on the hottest days and still falls behind.

We also check the practical details that decide where the equipment can go:

  • Wall space and mounting height for each indoor unit, with room for airflow around furniture and windows
  • Outdoor unit placement, clearance, and noise near bedrooms or neighbors
  • The line set route and length between indoor and outdoor units
  • Condensate drainage, either by gravity or with a condensate pump
  • Electrical panel capacity and whether a new dedicated circuit is needed
  • Exterior wall material, such as stucco, siding or block

Repair, Replace or Add: Your Options

Not every comfort problem needs a brand-new system. If you already have a mini-split that isn't keeping up, we start by diagnosing it. Common fixable problems include dirty filters and coils, clogged condensate lines, refrigerant leaks, failed sensors or fan motors, and communication faults between the indoor and outdoor units.

Replacement makes more sense in a few situations: an older system needs a major part like a compressor, leaks keep coming back, parts are no longer available, or the unit was undersized from the start. We'll explain what we found and lay out your options. That way you can weigh a repair against the age and condition of the equipment.

For homes with central air, a mini-split can be an addition rather than a replacement, covering a room the existing ducts don't serve well. If you're replacing an aging gas furnace, a heat pump is one option to consider. South Coast AQMD Rule 1111 limits NOx emissions from gas fan-type central furnaces sold and installed in the region. The district has been amending the rule toward zero-emission requirements and sets and revises its compliance dates, so check the current rule before planning a furnace replacement.

What Affects the Cost of a Mini-Split Installation

We don't quote a price until we've seen the home, because mini-split projects vary widely. The main factors are:

After the visit, you'll get a written estimate that lists the equipment and the work involved, so you can compare options clearly.

  • Number of indoor units and zones, and whether they share one multi-zone outdoor unit or use separate single-zone systems
  • Equipment capacity and efficiency ratings (SEER2 and HSPF2)
  • Indoor unit style: wall-mounted, ceiling cassette, floor console or concealed ducted
  • Line set length and route difficulty, including runs through attics, crawlspaces or multiple floors
  • Electrical work, such as a new circuit or panel upgrade
  • Extras like condensate pumps, line covers, wall brackets or pads
  • Permits required by your city

Rebates and Incentives in Los Angeles

If LADWP provides your electricity, you may be able to apply for a Consumer Rebate Program rebate on a qualifying heat pump system, which can include a mini-split. The amount depends on the unit's SEER2 and HSPF2 ratings. You file the application after the equipment is purchased and installed, within 12 months of purchase, so keep your paperwork.

Many homes outside the City of Los Angeles are served by Southern California Edison instead. That means the rebates available to you depend on the utility at your address, and we confirm the current offer before quoting it. Also note that the federal Energy Efficient Home Improvement Credit (25C) only covered qualifying heat pumps placed in service before December 31, 2025. It isn't available for new installations after that date.

How a Visit Works

Here's what to expect from the first visit to a finished installation:

Timing depends on the number of zones and whether electrical upgrades or permits are involved. We'll give you a clear schedule with your estimate.

  • Assessment: a technician walks through the rooms you want to heat and cool, takes measurements, and checks your electrical panel and outdoor space.
  • Recommendation: we explain the layout, unit locations and equipment options, and answer questions about noise, controls and maintenance.
  • Estimate: you receive a written estimate to review on your own time.
  • Installation: we mount the indoor and outdoor units, make a small wall opening, and run the line set, drain and wiring. Then we pressure-test and evacuate the lines before releasing refrigerant.
  • Startup and walkthrough: we test heating and cooling in every zone, show you how to use the remote or app, and explain how to clean the filters.

What to expect

How a visit goes

  1. Find the cause first

    We test the system and pinpoint what's wrong before suggesting parts or new equipment, so you're not paying to guess.

  2. Explain your options

    You'll hear what we found, what it means for your system, and the choices you have, including whether a repair makes more sense than a replacement.

  3. Check what applies to your home

    Rebates and local equipment rules depend on your utility and location. We confirm the current details for your address instead of assuming.

FAQ

Common questions

Don’t see your question? Call (669) 318-2662 and we’ll talk it through.

Can a ductless mini-split heat my home as well as cool it?

Yes. A mini-split is a heat pump, so it provides both heating and cooling. In Los Angeles's mild winters, a properly sized system can handle heating for most homes.

How many indoor units will I need?

It depends on the layout and how you use the space. Open areas may need one unit, while separate bedrooms usually each need their own. We decide after a room-by-room assessment.

Will a mini-split be noisy?

Indoor units are generally quiet. We also choose the outdoor unit's location with bedrooms, patios and neighbors in mind.

Do I qualify for a rebate?

It depends on your utility. LADWP customers may qualify for a Consumer Rebate Program rebate on qualifying heat pump systems, filed within 12 months of purchase. Homes served by Southern California Edison have different programs, so we confirm the current offer for your address.

Can I still get the federal tax credit for a heat pump?

No. The federal 25C credit covered qualifying heat pumps placed in service before December 31, 2025. It isn't available for new installations after that date.

How much maintenance does a mini-split need?

Clean the indoor filters regularly and keep the outdoor unit clear of debris. Periodic professional service keeps the coils and condensate drains clean and catches problems early.

Need Heating or Cooling Help?

Tell us what your system is doing and where your home is located. We'll diagnose the problem, explain your options, and let you know which rebates or local rules may apply before any work begins.

Call (669) 318-2662 Request Service